On December 28, the President signed into law an economic stimulus, budget and COVID-19 relief package. What this means for 
commercial and residential property owners and managers in Englewood, Florida and surrounding areas is the relief package includes:
How Can We Help You? Contact Us Today
We recently installed GeoThermal heating systems for a 1,700-square-foot home and an 8,000-square-foot pool, and we want to show you the layout of this installation.
How Can We Help You? Contact Us Today
Today we’re going to talk a little bit about reverse return units. They have a much more restrictive coil in them and you’ll only get about 45 gallons per minute out of each unit. However, with new coils, things are less restrictive, and it allows more water to come through.
There are four different modes for their main control units: heat, cool, auto, and off. There is also a safety switch within each unit. If the filters get too dirty or the pump turns off, you will see the word “flow” on the screen and you’ll know that it’s a pool water issue. The code sheet on the unit will be able to inform you of any pressing issues.
“
The time of year plays a big role in knowing
the kind of pressure problem you have.
”
If any high-pressure or low-pressure warnings have gone off and you see either “HP 5” or “LP 5” on the unit, this means it has shut itself off and it will stay locked out until you turn the breaker off and reset the unit. The time of year plays a big role in knowing what the problem is too.
If you have any questions about reverse return units or anything else relating to geothermal pool heating, don’t hesitate to give us a call or send us an email. We look forward to hearing from you soon.
How Can We Help You? Contact Us Today
When comparing the differences between air source heat pumps and water source heat pumps, what is the first thing that comes to mind? The answer is simple: One uses air and one uses water. Yet there are even more differences between these two heat sources that may not be so obvious.
During my recent lecture about swimming pool heating systems, the room was set to a comfortable 75 degrees. However, this same temperature would be far less comfortable if you were in a pool, because water transfers heat more efficiently than air. A lack of humidity translates to a lack of efficient heating.
When you use a water source, the temperature is more consistent. Bodies of water experience temperature change less rapidly than air. So which heating method is most beneficial for maintaining a pool’s temperature?
Geothermal heat sources are a very effective option for heating pools, because they can be installed indoors while an air source cannot. Since they don’t need any air flow, you have more options of where to position the system.
“
Geothermal heat sources offer great performance,
low operating costs, and a life expectancy of up to
15 or 20 years if serviced regularly.
”
Geothermal heat sources also offer great performance, low operating costs, and a life expectancy of up to 15 or 20 years if serviced regularly. They are also capable of cooling.
The primary drawback to this heating method is that it has a higher installation cost.
If you have any additional questions about geothermal heating, please feel free to contact me. I look forward to speaking with you soon.
Without a pool heater, homeowners are limited to when and how often they can use it. But if you heat your pool, you can benefit in several ways, including perhaps the most significant one: increasing your return on investment.
If you or your condo association are assessing ways to reduce your carbon footprint, chances are you are considering a geothermal heating and cooling system as a way to become more energy efficient and save money.
If you’re considering upgrading your HVAC system and want an option that will save you money and use less energy at the same time, a heat pump may be the perfect solution. In spite of the name, a heat pump both heats and cools a home. As a bonus, it does its job in a more energy-efficient manner than a traditional HVAC system.
Heat pumps are some of the most complicated machines that Florida homeowners possess. There are many elements and factors that come together to contribute to the efficiency of the overall system. Here are three keys to getting the most out of your heat pump.
Heat pumps may be one of the most energy-efficient ways to heat and cool homes in Florida because they use the heat in the air as fuel. To get the most efficiency from a pump, installing a heat-pump thermostat helps save energy, especially during the winter.
You may feel like you’re behind the eight ball if you haven’t been fully briefed on the basics of a 