Blog Category: Service & Maintenance

How Can We Help You? Contact Us Today

Here at Symbiont Service Corp, we’ve taken all necessary precautions to ensure the safety of our clients and employees during this time. We’re wearing masks, gloves, washing hands often, sanitizing, and practicing social distancing. We’re also helping some clients better purify the air and neutralize the viruses in their homes through the installation of a Whole House Air Purification System, which we’ll show you all about today.

Open Post

How Can We Help You? Contact Us Today

As we prepared for the impact of COVID-19, or coronavirus, maintaining good health, safety, and well-being for our customers and employees is our No. 1 priority.

Read More

How Can We Help You? Contact Us Today

Dave Ballard is at the Riverwood community pool, which is in the low to mid-90s and no longer refreshing. The solution is simple because Riverwood had purchased our Geothermal heaters that can cool and heat. I am here to switch the heaters from heat mode to cool mode to lower the temperature down to 88°.

Read More

How Can We Help You? Contact Us Today

We recently installed a 20kw Honeywell generator, and today we’re continuing our look at the benefits it can bring you. If you missed our previous installments, watch part one here, and part two here! Additionally, you can refer to this online guide.

Remember: The 20kw Honeywell generator is designed to serve as a backup power source. Per Florida building codes, the generators must be anchored to the ground using cement pads to prevent storm-related damage in the event of a hurricane or other natural disaster.

Read More

How Can We Help You? Contact Us Today

Our team recently installed a 20kw Honeywell generator, and today we’d like to shed some light on how this equipment works. You can follow along in the video above for a more detailed look at this generator and its various parts. Additionally, you can refer to this online guide.

The 20kw Honeywell generator is designed to serve as a backup power source. The generator kicks on when the unit senses a lack of utility voltage, at which point the engine will start. After a few seconds, the generator will then begin to supply power in place of the main source.

Read More

How Can We Help You? Contact Us Today

We’re getting close to hurricane season here in Southwest Florida, which means it’s time to start thinking about how you can protect your loved ones and keep your home safe and secure in the event of a power outage.

With that in mind, we want to talk to you today about Honeywell backup generators.

Everybody knows the Honeywell name, and many of us have Honeywell products already in our homes. The great thing about Honeywell generators is that they’re backed by a five-year parts and labor warranty if they’re installed by an authorized dealer, which we are.

If you’re interested in installing a Honeywell generator for your home, contact us and we’ll conduct a survey on your property. First, though, you have to decide whether you want a whole house generator or one for select items.

Read More

How Can We Help You? Contact Us Today

We’re back for part two of our Jupiter pool heater source pump control upgrade. We’ve finally installed the variable frequency drives and wanted to show you the new system that’s up and running today. If you missed part one of this message, you can view it here.

When the pumps come on, they come on in succession until they reach the desired pressure. This way, the units don’t exceed manufacturer specifications for pressure.

The beauty of installing the VFDs include the soft-starting capability I mentioned before, as well as the ability to set the pump by pressure. Also, if you run a pump at 80% speed, you’ll save 50% on your electrical consumption. Not only will the drive protect the unit it saves on energy consumption and extends the life of the pump.

Read More

How Can We Help You? Contact Us Today

Jim Howarth, Director of Field Operations, recently helped a customer of ours upgrade their resort-style pool and lazy river with 10 model 215 pool heaters. Five of them are on their main pool and five are on the lazy river. The five main pool units are on three 5hp submersible pumps. The formal pool holds 175,000 gallons and the lazy river holds 187,000 gallons.

We’re getting ready to install three Yaskawa p1000IQ Variable Frequency Drives that are going to allow us to control the pump flow by pressure. This will ensure that we don’t exceed the manufacturer’s specifications on the pressure going into the coils.

Read More

How Can We Help You? Contact Us Today

As you know, our team recently installed a large geothermal pool heating system at Eagle Lakes Community Park, and today we’re continuing our overview of how it works. If you happened to miss our first installment, you can check out part one here.

Once again, you can follow along in the video above to see Mike Jaques, one of our team members, explain it step by step.

Read More

How Can We Help You? Contact Us Today

Our team recently installed a large geothermal pool heating system at Eagle Lakes Community Park, and we’re going to give you a quick peek at the system today.

You can follow along in the video above to see Mike Jaques, one of our team members, walk through the systems and explain how they work.

The systems we installed are heating not one, but four different pools at the park: the lap pool, family pool, slide tower, and wading pool.

The lap pool is being heated with two PH 215 units. These large-model heaters provide a better carbon footprint than using several smaller units when it comes to heating and cooling larger pools. The PH 215 puts out 215,000 BTUs and has two heat exchangers within the unit.

Another unit featured in our video is the PH 90—a smaller system that puts out 90,000 BTUs and has one heat exchanger per pool. This system is designed to heat smaller pools, which is why we’ve decided to use it in conjunction with the PH 215 units we described earlier. It’s sometimes necessary for us to mix and match various units within a pool heating system to achieve the most efficient solution for a project.

Now that we’ve covered the units we used for this project, you may be wondering how they work.

There are three main components to a pool heater: the pool water coil, the source water coil, and the freon system. Using these components, water is pumped out of the pool, through the geothermal units’ heaters, and then pumped back in.

Pool heating systems also use closed-loop, lake, and aquifer well source water, which is moved constantly throughout the heaters. In the case of the system we’re showing you today, we used aquifer well source water.

Heaters will automatically sense and send signals to a component called the Variable Frequency Drive (VFD) when source water is needed.

I hope this information, along with the walkthrough tour of the system featured in the video above, has given you a better idea of how geothermal pool heating works and why it’s such an effective solution.

If you have any other questions or would like more information, feel free to give us a call or send us an email. We look forward to hearing from you soon.

Open Post